incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
PV substructure for pitched, double-seam, trapezoidal sheet and flat roofs, usually from K2 Systems; K2 Systems advises using only original components.
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 1002387K2 Systems · 1002387
K2 Systems Hammer-Head Screw 20/12 M8x20 for SingleRail 36/50
incl. 19% VAT
Pre-order · from 19.11. · plus shipping costs
Plus shipping costs
K2 Systems · Item no. PV10710019K2 Systems · PV10710019
K2 Systems Hammer-Head Screw 28/15 M10x30 + K2 Locking Tooth Nut M10 Set
In the set: Hammer-Head Screw 28/15 M10x30 · Hex Nut M10
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 1000373K2 Systems · 1000373
K2 Systems Solider Hook SLA Roof Hook for Slate Roofing H0/72
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 1006039K2 Systems · 1006039
K2 Systems Dome FlatConnector Set (Rail Connector Set for SpeedRail and FlatRail)
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
from 2 pcs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 1003586K2 Systems · 1003586
K2 Systems XS Module Center Terminal Set 34–38 mm
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 2002937K2 Systems · 2002937
K2 Systems Thread-Forming Metal Screw 6x25_et
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
from 2 pcs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 2004440K2 Systems · 2004440
K2 Systems Roof Hook SingleHook FlatTile Metal Roof
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
K2 Systems · 2002547K2 Systems · 2002547
K2 Systems Adapter Plate M12 Hanging Bolt Climber
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
In stock · plus shipping costs
Plus shipping costs
incl. 0 % VAT for system operators*
Pre-order · from 19.11. · plus shipping costs
Plus shipping costs
* Section 12(3) UStG: only with the operator declaration at checkout, otherwise plus 19 % VAT.
The substructure holds the solar panels in place on the roof and transfers wind and snow loads into the building. The product range consists largely of the mounting system from K2 Systems, suitable for pitched roofs, standing seam metal roofs, trapezoidal sheet metal roofs and flat roofs. The manufacturer offers a 12-year warranty on most K2 components.
Every PV substructure consists of the same components. The roof fixings provide the connection to the building. The rails, which distribute the load, rest on top of these. Module clamps hold the modules in place on the rails – as centre clamps between two modules and as end clamps at the edges. In addition, there are small parts such as hammer-head screws, nuts, rail connectors, end caps, lightning protection clamps and connectors with equipotential bonding.
| Roof | Mounting | Rails and mounting structure |
|---|---|---|
| Pitched roof | Roof hooks for various roof coverings, including slate and metal roofs; hanger bolts and hook bolts; wood screws 8 × 100 and 8 × 200 mm | SingleRail 36 (2.40, 4.80 and 5.95 m), SolidRail Light (2.40 and 4.80 m) |
| Seamed metal roof | CF:x double standing seam clip, without piercing the sheet metal | SingleRail 36 |
| Trapezoidal sheet metal and corrugated sheets | Thread-forming metal screws; adapter plate for M12 hanger bolts | MiniRail, BasicRail 22 with BasicLock and BasicClip |
| Flat roof | Ballast instead of roof penetration | East-west mounting D-Dome 6.10 with the ballast support Speed Porter (according to the manufacturer, up to approximately 40 kg of ballast per support) |
For flat roofs, there are ready-assembled D-Dome 6.10 mounting kits for 2, 4, 6, 8, 10 or 12 modules. They contain base profiles, mounting brackets, clamps and ballast supports; the ballast blocks are not included. According to the manufacturer, the Base Set is designed for module widths from 960 to 1,170 mm.
In addition to K2 Systems, the range includes module clamps from Solitek and a bracket for balcony railings from Hantech, which can be used to attach modules to balcony railings. For equipotential bonding between the module frame and the rack, there are lightning protection clamps, connectors with equipotential bonding and the TerraGrif clamps for the Dome system.
Three factors determine the parts list: the roof covering, as this dictates the fixing method; the frame height of the modules, as this determines the clamps (the range includes clamping ranges such as 25 to 40, 30 to 42 or 30 to 50 mm); and the number and orientation of the modules, as portrait and landscape installations require different lengths of rail. The components of a system are designed to work together. The groove width of the rail and the head shape of the screw must match, which is why systems should not be mixed. Whether the roof can bear the load is a matter for a structural analysis, particularly in the case of ballasted mounting systems.
ACTEC supplies the installation materials but does not carry out the installation. The appropriate solar panels are listed in a separate category, whilst cables, MC4 connectors and tools are found under PV installation materials. The complete PV kits do not include a substructure; this must be ordered separately to suit the roof. Further information about the manufacturer can be found at K2 Systems.
For photovoltaic systems and their essential components, no value added tax is charged where the conditions of Section 12 (3) of the German VAT Act (UStG) are met. You state during the ordering process whether they apply to you.
That depends on the roof covering. The range includes roof hooks for various types of tiles, for slate and for metal roofs. Before ordering, check the manufacturer’s specifications for the relevant model to confirm which roof covering the hook is designed for.
No. The rails, screws and clamps within a single system are designed to work together. Please stick to a single installation system.
Not with the D-Dome 6.10: this is secured using ballast. The ballast supports are included in the sets, but the blocks are not.
No. The kits contain modules, inverters and, where specified, the storage unit. You can select the appropriate substructure for your roof here.